Last Updated: November 20, 2026
Quick Summary
A commercial solar installer should design each system around your own site, not sell a standard kit. Look for qualified electrical design, structural assessment and a clear route from survey to commissioning. Ask who produces the design and whether they will sign off the electrical layout.
- Check the installer is MCS certified, a useful first filter for installation quality in the UK.
- Expect at least 12 months of consumption data to size the array against your real load profile.
- Ask whether the installer will carry out a structural assessment of the roof before mounting.
- A credible proposal includes a load analysis, generation estimate, roof notes and a single-line electrical diagram.
- Be cautious of installers who quote without visiting the site for a proper survey.
Table of Contents
- What Engineering Expertise a Commercial Solar Installer Should Actually Have
- Why a Commercial Solar System Needs a Bespoke Engineering Design
- What a Commercial Solar Site Survey Should Assess
- Integrating Solar Panels with an Existing Diesel Generator
- Adding Solar and Battery Storage for Businesses Without Overspending
- How to Compare Installer Proposals and Check Engineering Competence in Burnley
- Booking a Site Survey and Engineering Review with Squirrel Energy
- Frequently Asked Questions
What Engineering Expertise a Commercial Solar Installer Should Actually Have
Choosing a commercial solar installer is a serious decision, and the engineering behind the system matters more than the brochure. A commercial installer should understand electrical and mechanical design as well as the installation itself.
Look for a firm that designs each system around your site, rather than offering a standard kit. Ask who produces the design, what qualifications they hold and whether they will sign off the electrical layout. Installers that cannot answer these questions clearly are often selling a product rather than an engineered solution.
Check that the installer is MCS certified (Becoming certified). Microgeneration Certification Scheme requirements for solar PV sets the standard for installation quality in the UK, and certification is a useful first filter.
Engineering competence also shows up in the paperwork. A credible proposal includes a load analysis, a generation estimate, roof or ground assessment notes and a single-line electrical diagram. Expect the installer to explain how the system connects to your existing supply and what happens during a grid outage.
Why a Commercial Solar System Needs a Bespoke Engineering Design
No two commercial sites use energy in the same way. A cold store, a dairy, a retail unit and a farm with grain drying each have different load patterns, peak demands and roof conditions. A bespoke design matches the system to those realities instead of forcing the site to fit a template.
A common mistake is sizing the array by roof area alone. Filling every available square metre often produces panels that export power you cannot use, or that cannot be connected within your existing supply capacity. The better approach starts with metered consumption data and works outward from there.
Sizing against your real load profile
Good sizing starts with at least 12 months of half-hourly or daily consumption data where it is available. Engineers compare daytime load with expected generation to decide how much solar your site will actually use on site. Battery storage can then shift surplus daytime output into the evening peak.
In practice, this means the right system size depends on when you use power, not only how much. A business that runs heavy machinery during the day will consume far more of its own solar output than one that operates mainly overnight.
Structural and roof load considerations
Roof structure is often the most overlooked part of a commercial install. Older industrial buildings may have purlins, trusses or cladding that need checking before any mounting system goes on. Engineers assess the roof's load capacity, fixing method and the condition of the covering.
Ask whether the installer will carry out a structural assessment, and whether they work with a structural engineer where the roof is marginal. Skipping this step can create costly problems later, including leaks and premature roof failure.
What a Commercial Solar Site Survey Should Assess
A proper site survey is the foundation of any engineered design, and for commercial projects it must go well beyond a quick roof measurement.

!An engineer in a hi-vis jacket and hard hat inspecting the pitched roof of a commercial building with a clipboard and tablet, sunlight on the roof surface
Expect the surveyor to measure your existing distribution board, check spare capacity and note where the inverter and battery could sit safely. They should also discuss how the system will connect to the grid and whether any export arrangements apply.
A thorough survey should produce a written report that includes:
- Structural notes: roof type, covering condition, purlin and truss spacing, and any areas needing structural reinforcement.
- Electrical details: existing supply capacity, distribution board schedules, earthing arrangements and spare ways for new connections.
- Shading analysis: measured or modelled shading from chimneys, parapets, adjacent buildings and trees, with the impact on yield quantified.
- Grid connection information: the point of connection, whether export limitation is likely, and any known local network constraints.
- Access and logistics: how equipment will be delivered and lifted to the roof, and where scaffolding or mobile access equipment can be positioned.
Practical questions to ask include:
- Who carries out the survey, and what are their engineering qualifications?
- Will the survey produce a written report with drawings?
- How will shading and roof condition feed into the generation estimate?
- What information do you need to provide beforehand, such as utility bills and roof plans?
A thorough survey takes time. You can see what a renewable energy site survey covers, what to prepare and how it shapes your quote. Be cautious of installers who quote without visiting the site.
The survey report should cover the following areas, each of which affects the final design.
| Survey area | What it covers | Why it matters |
|---|---|---|
| Structural notes | Roof type, covering condition, purlin and truss spacing | Sets whether reinforcement is needed |
| Electrical details | Supply capacity, board schedules, earthing, spare ways | Confirms room for new connections |
| Shading analysis | Chimneys, parapets, nearby buildings and trees | Quantifies the impact on yield |
| Grid connection | Connection point, likely export limits, network constraints | Shapes export and approval planning |
| Access and logistics | Delivery route, lifting, scaffold positions | Affects install time and disruption |
Integrating Solar Panels with an Existing Diesel Generator
Many commercial and farm sites already run diesel generators for backup. Adding solar to that setup requires careful control design, because the two sources must not fight each other or overload the generator.
The main design task is controlling how solar output and generator output share the load. Without correct controls, a generator may run inefficiently at low load, or the solar system may be forced offline during generator operation. An experienced installer will model this interaction before any equipment is ordered.
Battery storage often helps here. A battery can smooth the transition between solar, generator and grid, reducing generator run time and wear. Confirm with the installer how the control system handles automatic start, load prioritisation and grid reconnection.
Adding Solar and Battery Storage for Businesses Without Overspending
Battery storage makes commercial solar more useful, but it also adds cost. The right approach is to size the battery to the energy you can actually shift, rather than buying the largest unit on offer.
Start by identifying the evening or night loads you want to cover. A battery sized for those loads usually delivers better value than one sized for peak export. Ask the installer to show the financial case with realistic assumptions, including how the battery degrades over time.
Keep future flexibility in mind. Choose a design that allows additional battery modules or a larger inverter later, without replacing the whole system.
How to Compare Installer Proposals and Check Engineering Competence in Burnley
A useful comparison starts with the engineering content, not the headline price. The strongest proposals will show you the design basis, the assumptions behind the yield estimate and the grid application details, rather than just a system size and a payback figure.
Our recommended checklist for comparing proposals:
- Design basis: Is there a site-specific load analysis and generation estimate? Ask for the half-hourly consumption data used and the assumed self-consumption ratio.
- Qualifications: Who designs the system, and are they qualified electrical engineers? Ask for the name and role of the designer, not just the company.
- Structural: Does the proposal address roof or ground loading, and does it include structural calculations or a letter from a structural engineer where needed?
- Grid connection: Does it explain connection, protection and export arrangements, including any G99 application and the status of the network operator's approval?
- Documentation: Will you receive drawings, commissioning records and maintenance guidance? Ask for a sample handover pack.
- Support: Who answers questions after handover, and for how long?
Add these checks to your comparison:
- Roof condition and remedial work: Older mill and warehouse roofs may need repair or replacement before solar is fitted. Ask whether the proposal includes a roof condition survey and who is responsible for remedial work.
- Grid capacity: Some networks have limited export capacity. Ask the installer how they will confirm available capacity with the network operator and what happens if export is restricted.
- Planning considerations: Some buildings sit in conservation areas or are listed. Ask whether the installer has checked planning requirements and whether an application is needed.
- Access and disruption: Narrow streets and shared yards can affect delivery and scaffolding. Ask for a site-specific access plan and a staged programme showing when disruption will occur.
If a proposal lacks these elements, ask for them in writing before you sign anything. A clear answer is a good sign. Vague replies usually mean the design is generic. Watch out: a proposal that cannot show you the grid application status or the structural basis for the mounting design is not ready to compare on price alone.
Booking a Site Survey and Engineering Review with Squirrel Energy
If you are weighing up commercial solar for your site, the next step is a survey and engineering review. Every system is custom designed by our electrical engineers, who draw on more than 40 years of experience. We do not quote fixed prices before the survey, because the right system depends on your site, your load and your roof.
Our team will assess your energy use, roof structure and electrical connection, then explain the design in plain terms. You can book a renewable energy site survey to start the process and see how an engineered approach differs from a standard kit.
For businesses that want to explore battery storage options, store your solar energy and cut your bills with a system designed around your real consumption. Installing a solar system is a significant project, and it should be built on sound engineering from the start.
Squirrel Energy: Engineered Solar for Commercial Sites
Contact Squirrel Energy today.
Frequently Asked Questions
What engineering expertise should a commercial solar installer have?
A commercial solar installer should be able to show qualified electrical and structural engineering input on every project, not just installation trade skills. Ask who designs the system, whether the design is checked against your actual half-hourly or daily demand data, and how roof and structural loading is assessed. Look for MCS certification where it applies, recognised electrical competence, and a named engineer you can speak to before work starts. Good installers will explain their design decisions in plain language and document them for your records.
Can commercial solar panels work with an existing diesel generator?
Yes, solar panels can be integrated with an existing diesel generator, but the control system must be designed for it. The inverter, generator controls and any export or islanding arrangement need to work together so the generator is not fighting the solar output or running inefficiently at low load. This is an engineering task that depends on your generator model, load profile and site electrical layout, so it should be assessed in a site survey before any equipment is specified.
What should a commercial solar site survey assess?
A commercial solar site survey should cover your energy use history, roof or ground condition, structural capacity, shading, electrical distribution and grid connection arrangements. It should also record the position of the main supply and any existing generation, and identify any constraints on export. The output should be a written feasibility assessment with a system concept, expected generation and a clear statement of the assumptions behind the figures. Ask for this in writing before you commit to a design.
Why use a specialist installer for a farm or industrial solar project?
Farms and industrial sites have loads and electrical arrangements that differ from standard commercial roofs, such as high seasonal demand, motors and grain drying equipment, and existing generation. A specialist installer with engineering-led design can size the system to those patterns and plan for grid independence where it matters. Squirrel Energy designs each system individually, so you can discuss your specific requirements with the engineering team before any figures are fixed.
